| Hunecke accessories, suitable for any greenhouse. |
|
Additional information:
The energy saver! By direct air induction in the gable area only and by means of the thermo timer!
Energy-saving heating of your greenhouse during the cold season or efficient air circulation during the hot season. Our recirculating air heating always ensures an ideal climate in the greenhouse and prevents overheating, fungal infestation and putrefaction. The thermo timer controls fan and heating element according to the needs. Warm air is aspirated in the gable area only by means of the aluminum induction pipe (length 250 cm), reheated in an energy-saving manner, and blown out again via two flexible aluminum blowpipes (length 100 cm). When reaching the predetermined heating temperature, the thermo timer deactivates the recirculating air heating or activates the recirculating air heating again, when the temperature has dropped below the desired temperature. The maximum difference in temperature is ±1 °C. The thermo timer is an electrical control unit, which adjusts temperature and time in an optimum manner.
The air circulation during the summer is almost free: 1 kW only for an operating time of 45 hours. In the summertime, the recirculating air heating has the same function as a fan.
We recommend recirculating air heating systems for greenhouses up to ~ 12 m².
Advantages:
- Very low energy consumption due to short heating intervals, since the heat sensor (thermostat) is installed outside of the housing and therefore able to react faster.
- Direct air induction from the gable area only and no side induction! (Side induction and other additional ducts reduce the overall performance, since the hottest air is located in the gable area exclusively)
- Temperature accuracy: temperature setting ±1 °C
- Distance between recirculating air heating and glazing approx. 11 cm – an optimum way of insulation in the rear of the recirculating air heating and less cooling
- Air circulation during summer: 1 kW only for an operating time of 45 hours
- High-quality product, metal housing – powder-coated
- Ready-to-plug-in delivery, easy to assemble.
Technical specifications, equipment & scope of delivery:
- Calorific value: 2000 watts / 230 V
- Engine power: 22 watts / 230 V
- Fan capacity: 140 m3/hr
- Protective system: IP24, splashproof
- Class I equipment: VDE approved
- Control indicator light
- Thermal overload protection
- Adjustable: from 0 °C to +40 °C
- Dimensions: Height 40,5 cm, width 30 cm, depth 12 cm
- 1 pc suction pipe: Length 250 cm, Ø 100 mm
- 2 pc Blowpipes: Length 100 cm, Ø 80 mm
- 1 pc thermo timer incl. sensor cable (100 cm) and sensor
- 3 pc aluminum wall-mounting profiles 75 cm ea
- Cpl. fastening material (nuts / bolts / pipe clamps)
|
|
